|
Product Details:
|
| Material: | Galvanized Steel Sheet | Band Width: | 28mm |
|---|---|---|---|
| Thickness: | 1.0mm-1.2mm | Diameter Range: | 80mm-600mm |
| Seal: | Red TPE | Locking Type: | Over-centre Latch |
| Application: | Dust Extraction, Workshop Ducting | Reuse: | Reusable, Tool Free Strip Down |
| Highlight: | Modular ducting clamp ring,28mm band duct clamp,Dust extraction duct clamp |
||
Dust extraction duct is not a permanent installation. It is opened whenever a machine is moved, a filter is changed or a blockage has to be cleared, and every one of those operations happens at a joint. This modular ducting clamp ring is designed for that working pattern: a wide 28mm band spreads the clamping load so the duct end is not dented by repeated opening, and the red seal ring sits in the rolled channel so it is not lost when the clamp comes off in a dusty workshop.
The ring is built from galvanized steel in 1.0mm or 1.2mm and covers diameters from 80mm to 600mm, the range that a woodworking, metal finishing or powder handling shop normally installs. It connects round spiral duct, flexible hose and rigid pipe, and because the modular sections of a modern extraction system are all cut to the same nominal sizes, one clamp family can serve the whole network.
Workshops that rearrange machinery need a fitting that goes on and comes off without damage, which is why a modular ducting clamp ring uses a wide band. A 28mm band duct clamp spreads the load over a longer area of duct, and a dust extraction duct clamp with that width can be cycled far more often before the duct end starts to distort.
| Product Type | Modular ducting clamp ring |
|---|---|
| Body Material | Galvanized steel sheet |
| Thickness | 1.0mm / 1.2mm |
| Band Width | 28mm wide face |
| Profile Height | 8mm |
| Working Diameter | 80mm to 600mm, continuous adjustment |
| Seal | Red TPE ring captured in channel |
| Locking | Over-centre latch, hand operated |
| Open and Refit | No tools, reusable many times |
| Duct Types | Spiral duct, flexible hose, rigid pipe |
| Surface | Galvanized, deburred edges |
| Packing | Carton, mixed diameters per carton |
For combustible dust applications, check how the duct is bonded and earthed before choosing a clamp with a rubber seal; the seal insulates the joint electrically, and a separate bonding strap is normally required across it. We can supply the clamp without a seal, or with a bonding tag fitted, if your risk assessment requires continuity. Shops that reconfigure their extraction layout every season usually keep a stock of the mid sizes, since those are the ones that move most often.
Stores that hold a modular ducting clamp ring in several diameters usually keep one seal profile spare, because the same seal is used across the range. A 28mm band duct clamp is also the sensible choice where flexible hose is clamped to a machine outlet, and any dust extraction duct clamp used on combustible dust must have a bonding strap across the joint.
A: The mechanical clamp is suitable, but the rubber seal interrupts electrical continuity at the joint. Most risk assessments therefore require a separate bonding strap across each clamped joint, which we can supply with the order.
A: It suits spiral galvanized duct, stainless round duct, rigid PVC pipe and flexible hose within the diameter range. On soft flexible hose the wide band is an advantage because it spreads the load and avoids crushing the hose wall.
A: The profile is designed to be cycled many times, and the band does not take a permanent set in normal workshop use. If a ring is opened daily for years, keep a spare on the shelf so a damaged clamp never stops production.
A: Yes, the seal ring is a separate part and can be ordered with the clamps or afterwards. Tell us the diameters you hold in stock and we will calculate a sensible spare quantity.
A: In normal workshop use the ring can be cycled many times, because the 28mm band duct clamp spreads the load and does not dent the duct end. If a dust extraction duct clamp is opened daily, keep a spare ring on the shelf rather than waiting for a failure.
Tell us the diameters in your extraction network and how often the joints are opened, and we will quote the rings, spare seals and packing plan you need.
Contact Person: Amy
Tel: 18931182030
Fax: 86-311-85329078