|
Product Details:
|
| Material: | Cold Rolled Steel With Powder Coating | Finish: | RAL Powder Coat |
|---|---|---|---|
| Band Width: | 28mm | Thickness: | 1.0mm-1.2mm |
| Diameter Range: | 80mm-600mm | OEM: | Yes, Logo And Carton Printing |
| Seal: | Red Or Black TPE | Application: | Branded Ventilation Systems, Retail Kits |
| Highlight: | Powder coated duct clamp,OEM color duct clamp,RAL custom duct clamp ring |
||
A clamp is the part of a duct system that the installer touches, and for a distributor it is also a part that can carry a brand. This OEM duct clamp is supplied powder coated to a chosen RAL shade instead of the standard galvanized finish, so the fitting matches the branded duct, the air handling unit and the catalogue artwork. Colours are matched from a RAL reference or a physical sample, and the shade is confirmed on a coated panel before the batch is released.
The clamp itself is the same pressed steel body used in our standard range, covering 80mm to 600mm with a red or black seal ring and an over-centre latch. What changes for an OEM order is the finishing and the packing: a colour of your choice, a logo printed on the carton, a barcode label with your article number, and quantities packed to suit your warehouse rather than ours.
Distributors usually start with one size in a house colour, which is why a powder coated duct clamp is quoted per shade rather than per part. An OEM color duct clamp is planned across a size mix, and a RAL custom duct clamp ring is approved on a coated panel before the batch is pressed, so the shade is settled before the cartons are printed.
| Product Type | OEM color coated duct clamp |
|---|---|
| Base Material | Cold rolled steel sheet, 1.0mm / 1.2mm |
| Finish | Powder coated, RAL shade of your choice |
| Colour Options | RAL matched, physical sample accepted |
| Band Width | 28mm |
| Working Diameter | 80mm to 600mm, continuous adjustment |
| Seal | Red or black TPE ring |
| Locking | Over-centre latch, hand operated |
| Branding | Logo printed on carton and label |
| Label Data | Your article number, barcode, size and quantity |
| Packing | Carton per size, master carton or pallet |
| Order Basis | OEM run per colour and size, MOQ per shade |
Powder coating covers the outside faces well, but a coated clamp is not a substitute for a galvanized or stainless clamp in a wet environment, because the cut edges are protected by the coating film only. If the clamp will be installed outdoors or in a washdown area, we recommend a galvanized body with a clear or coloured top coat, or stainless with a coloured powder finish. For OEM programmes we keep the approved colour panel and the carton artwork on file, so repeat orders match without sending a physical sample each time.
Repeat orders are easier when the colour record is kept on file, so a powder coated duct clamp ordered a year later still matches the first run. If your catalogue shows the fitting, send the page: an OEM color duct clamp with printed cartons and a RAL custom duct clamp ring in the same shade is the combination most distributors choose.
A: Yes, from a RAL number or a physical sample. We coat a panel and send it for your approval before the batch is produced, so there is no argument about the shade after shipment.
A: It depends on the number of sizes and the total quantity. As a rule an OEM run is planned across a mix of diameters rather than one size, so tell us the size split you sell and we will propose an economical lot.
A: Yes. We print your artwork, article numbers and barcode on the carton and label, and we keep the approved file on record for repeat orders.
A: Only with the right base finish underneath. For outdoor or washdown installation we recommend galvanized steel with a coloured top coat, or stainless with a powder finish, and we will say so rather than sell a coating that will fail.
A: Yes. An OEM color duct clamp order includes carton and label artwork, and the RAL custom duct clamp ring inside is the same fitting in the agreed shade, packed to the quantity your warehouse needs.
Send your RAL reference, size split and carton artwork, and we will return a colour panel, packing proposal and quotation for your own brand clamp programme.
Contact Person: Amy
Tel: 18931182030
Fax: 86-311-85329078